smsklion.blogg.se

Volante logitech g29
Volante logitech g29










volante logitech g29
  1. VOLANTE LOGITECH G29 HOW TO
  2. VOLANTE LOGITECH G29 INSTALL

Put the spacer in the centre of the hub, fixing it so that it fits tightly and with the ACELITH lettering straight and facing you. In the tutorial video the spacer is different: the one you received is better, don't worry :) The black screws and nuts are already attached to it, so don't unscrew them for now. In the kit you will find, in a plastic bag, a black plastic spacer.

VOLANTE LOGITECH G29 INSTALL

Now your steering wheel is ready to install the Mod Acelith.

  • Replace the front part of the hub and screw it in with the rear screws you unscrewed at the beginning.
  • Be careful when closing the hub: make sure the white cable doesn't get pinched by some mechanism, and make sure that if you are working on a G29 the ps3-ps4 switcher mechanism is aligned and working (G923 and G920 don't have this mechanism).
  • Now that you have removed all 4 original buttons, you can start reassembling the hub, putting the circuit board back in place, screwing in the small silver screws and reconnecting the white cable.
  • Remove the two silver screws and the two screws on the L2\R2 buttons.
  • volante logitech g29

    Disconnect the white cable from the circuit board and then remove the circuit board from the steering wheel tray by unscrewing the small silver screws, as in the video above.To avoid breaking it, just avoid bumping it. Be very careful when opening the hub and separating it from the steering wheel, as the mechanism of this switcher is delicate. If you are working on a G29, you will notice that there is a ps3-ps4 switcher at the top of the hub (see photo).If you are working on a G29 please read the next step carefully Unscrew the 6 front screws of the cap with the logitech logo and detach the front half of the steering wheel from the base.Using a small screwdriver, remove the screws from the back of the hub, including the ones that secure the 元 and R3 buttons (LB and RB in the case of the XBOX version).

    VOLANTE LOGITECH G29 HOW TO

    How to disassemble the original steering wheel.įirst you need to remove the original rim, and to do so I recommend following the step-by-step video tutorial above, but here are the main steps: Here the video tutorial (english version 🇬🇧). Watch this video and read the tutorial below to get an idea of what you need to do. Modify your steering wheel if you're sure of where to put your hands. Important: logitech steering wheels, compared to others, are more complex to disassemble.












    Volante logitech g29